Timber Frame Sectional Housing- My Flat Pack Homes

https://www.logcabinslv.co.uk/logcabins/product-range/timber-frame-gallery/sectional-buildings-1066.html

sectional timber frame housing

sectional timber frame housing

Typical Construction Materials

Sectional Buildings 1066

 

This is our typical Timber Frame Specification.

 

Exterior walls:

·      Horizontal spruce panel 20x140mm – undercoated once and painted twice;

·      Vertical battens 20x45mm c/c600 for air gap;

·      Gypsum plate 9.5mm as wind barrier;

·      Segments of wooden framework 45x195mm c/c600;

·      KNAUF insulation 200mm – in free lengths;

·      Plastic film 0.2mm – in free lengths;

·      Battens 45x45mm c/c600 for cables and pipes – in free lengths;

·      KNAUF insulation 50mm – in free lengths;

·      10mm chipboard only in kitchen and bathrooms – in free lengths;

·      12.5mm gypsum plate – in free lengths.

 

Inside walls:

·      12.5mm gypsum plate – in free lengths;

·      Segments of wooden framework 45x95mm c/c600 and for bearing walls 45x145mm c/c600;

·      KNAUF insulation 100/150mm – in free lengths;

·      12.5mm gypsum plate – in free lengths.

 

Roof:

·      Final roof cover – not included, supplied by the Client;

·      Battens 45x45mm c/c600 across rafters for final roof cover – in free lengths;

·      Battens 45x45mm c/c600 along roof rafters for air gap – in free lengths;

·      Diffusion film Tyvec Pro – in rolls;

·      Precut rafters 45×220+45x95mm c/c600 – in free lengths;

·      KNAUF insulation 300 mm – in free lengths;

·      Plastic film 0.2mm – in free lengths;

·      Glue-lam balk – in free lengths;

·      KNAUF insulation 50 mm – in free lengths;

·      Battens 45x45mm c/c400 for pipes and cables – in free lengths;

·      12.5mm gypsum plate – in free lengths.

Ceiling between ground and first floors:

·      Glue-lam beams on the columns 7,5m and 4,4m – in free lengths;

·      One inside column and other columns in the framework (as specified in the drawings) – in free lengths;

 

 

Windows and doors:

·      Windows (3units): wooden frame windows with triple glass package, European-type (inward opening, with handles), coated with transparent lacquer or painted (color to be specified).

·      Outside doors (4units): simple wooden framed glazed entrance doors with insulated plate, with 3-plug locks and handles, impregnated, primed and coated with transparent lacquer or painted (color to be specified).

·      Wooden inside doors (4units): made glued pinewood with impregnated MDF fillings, with simple locks (without handles), primed and coated with transparent lacquer or painted (color to be specified).

·      Inside inlets for the windows (Furinger): made of impregnated MDF, painted white.

 

 

Additional materials:

·      Galvanized metal materials needed for segment assembling: bolts, anchoring bolts, metal plates are included.

·      Boards for covering outside joints of segments, wind boards and panel boards for covering the bottom outside of the roof in free lengths, all materials painted as outside panel white.

·      Rain gutter system made of coated metal.